Datasheet4U Logo Datasheet4U.com

74LVC16240ADGG - 16-bit buffer/line driver

Download the 74LVC16240ADGG datasheet PDF. This datasheet also covers the 74LVC16240A variant, as both devices belong to the same 16-bit buffer/line driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74LVC16240A is a 16-bit inverting buffer/line driver with 3-state outputs.

The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

Key Features

  • 5 V tolerant inputs/outputs for interfacing with 5 V logic.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74LVC16240A-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC16240A 16-bit buffer/line driver Philips
74LVC16244A 16-bit buffer/line driver NXP Semiconductors
74LVC162245A 16-bit transceiver Philips
74LVC162373A 16-bit D-type transparent latch Philips
74LVC162374A 16-bit edge triggered D-type flip-flop Philips

Other Datasheets by Nexperia

Part Number Description
74LVC16240A 16-bit buffer/line driver
74LVC16240A-Q100 16-bit buffer/line driver
74LVC16241A 16-bit buffer/line driver
74LVC16241ADGG 16-bit buffer/line driver
74LVC16244A 16-bit buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC16240A 16-bit buffer/line driver with 5V tolerant inputs/outputs; inverting; 3-state Rev. 5 — 25 April 2019 Product data sheet 1. General description The 74LVC16240A is a 16-bit inverting buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications. This device is fully specified for partial power-down applications using IOFF.