Datasheet4U Logo Datasheet4U.com

74LVC2245A - Octal transceiver

General Description

The 74LVC2245A is an 8-bit transceiver with 30 Ω termination resistors and 3-state outputs.

Key Features

  • Overvoltage tolerant inputs to 5.5 V.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low-power consumption.
  • Direct interface with TTL levels.
  • IOFF circuitry provides partial Power-down mode operation.
  • Integrated 30 Ω termination resistors.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC2245A Octal transceiver NXP
74LVC2244A Octal buffer/line driver NXP
74LVC2373A Octal D-type transparent latch NXP
74LVC240A Octal buffer/line driver NXP
74LVC240A OCTAL BUFFER/LINE DRIVER Diodes

Other Datasheets by Nexperia

Part Number Description
74LVC2244A Octal buffer/line driver
74LVC240A Octal buffer/line driver
74LVC244A Octal buffer/line driver
74LVC244A-Q100 Octal buffer/line driver
74LVC245A Octal bus transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC2245A Octal transceiver with direction pin, 30 Ω series termination resistors; 5 V tolerant input/output; 3-state Rev. 6 — 30 April 2021 Product data sheet 1. General description The 74LVC2245A is an 8-bit transceiver with 30 Ω termination resistors and 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF.