Datasheet4U Logo Datasheet4U.com

74LVC245A - Octal bus transceiver

General Description

The 74LVC245A; 74LVCH245A is an 8-bit transceiver with 3-state outputs.

Key Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low-power consumption.
  • Direct interface with TTL levels.
  • Overvoltage tolerant inputs to 5.5 V.
  • Bus hold on all data inputs (74LVCH245A only).
  • IOFF circuitry provides partial Power-down mode operation.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • H.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC245A Octal bus transceiver NXP
74LVC245A LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER STMicroelectronics
74LVC245A OCTAL BUS TRANSCEIVER Diodes
74LVC245A Low-Voltage CMOS Octal Transceiver ON Semiconductor
74LVC245 Octal Bidirectional Transceivers Hitachi Semiconductor

Other Datasheets by Nexperia

Part Number Description
74LVC245A-Q100 Octal bus transceiver
74LVC240A Octal buffer/line driver
74LVC244A Octal buffer/line driver
74LVC244A-Q100 Octal buffer/line driver
74LVC2244A Octal buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC245A; 74LVCH245A Octal bus transceiver; 3-state Rev. 12 — 16 September 2021 Product data sheet 1. General description The 74LVC245A; 74LVCH245A is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF.