Datasheet4U Logo Datasheet4U.com

74LVC4066-Q100 - Quad bilateral switch

General Description

The 74LVC4066-Q100 is a high-speed Si-gate CMOS device.

The 74LVC4066-Q100 provides four single pole, single-throw analog switch functions.

Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE).

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Very low ON resistance:.
  • 7.5 Ω (typical) at VCC = 2.7 V.
  • 6.5 Ω (typical) at VCC = 3.3 V.
  • 6 Ω (typical) at VCC = 5 V.
  • Switch current capability of 32 mA.
  • High noise immunity.
  • CMOS low-power consumption.
  • Direct interface T.

📥 Download Datasheet

More Datasheets from Nexperia

Part Number Description
74LVC4066 Quad bilateral switch
74LVC4245A Octal dual supply translating transceiver
74LVC4245A-Q100 Octal dual supply translating transceiver
74LVC4245AD Octal dual supply translating transceiver
74LVC4T3144 4-bit dual supply buffer/line driver
74LVC4T3144-Q100 4-bit dual supply buffer/line driver
74LVC00A Quad 2-input NAND gate
74LVC00A-Q100 Quad 2-input NAND gate
74LVC00AD Quad 2-input NAND gate
74LVC02A Quad 2-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC4066-Q100 Quad bilateral switch Rev. 2 — 26 March 2020 Product data sheet 1. General description The 74LVC4066-Q100 is a high-speed Si-gate CMOS device. The 74LVC4066-Q100 provides four single pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Schmitt-trigger action at the enable inputs makes the circuit tolerant of slower input rise and fall times across the entire VCC range from 1.65 V to 5.5 V. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.