Datasheet4U Logo Datasheet4U.com

74LVC541A-Q100 - Octal buffer/line driver

General Description

The 74LVC541A-Q100 is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs.

The output enable inputs OE1 and OE2 control the 3-state outputs.

This device is fully specified for partial power-down applications using IOFF.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • 5 V tolerant inputs for interfacing with 5 V logic.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.
  • Direct interface with TTL levels.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V to 3.6.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC541A Octal buffer/line driver NXP
74LVC541A OCTAL BUFFER/LINE DRIVER Diodes
74LVC541A Low-Voltage CMOS Octal Buffer ON Semiconductor
74LVC540A OCTAL BUFFER/LINE DRIVER Diodes
74LVC540A Low-Voltage CMOS Octal Buffer ON Semiconductor

Other Datasheets by Nexperia

Part Number Description
74LVC541A Octal buffer/line driver
74LVC573A Octal D-type transparent latch
74LVC573A-Q100 Octal D-type transparent latch
74LVC574A Octal D-type flip-flop
74LVC594A 8-bit shift register

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC541A-Q100 Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 3 — 13 March 2020 Product data sheet 1. General description The 74LVC541A-Q100 is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs. The output enable inputs OE1 and OE2 control the 3-state outputs. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications.