Datasheet4U Logo Datasheet4U.com

HEF4051B-Q100 - 8-channel analog multiplexer/demultiplexer

General Description

The HEF4051B-Q100 is an 8-channel analog multiplexer/demultiplexer with three address inputs (S1 to S3), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z).

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from 40 C to +85 C and from 40 C to +125 C.
  • Fully static operation.
  • 5 V, 10 V, and 15 V parametric ratings.
  • Standardized symmetrical output characteristics.
  • ESD protection:.
  • MIL-STD-833, method 3015 exceeds 2000V.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 ).
  • Complies with JEDEC standard JESD 13-B 3.

📥 Download Datasheet

Datasheet Details

Part number HEF4051B-Q100
Manufacturer Nexperia
File Size 775.78 KB
Description 8-channel analog multiplexer/demultiplexer
Datasheet download datasheet HEF4051B-Q100 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HEF4051B 8-channel analogue multiplexer/demultiplexer NXP
HEF4050B HEX non-inverting buffers NXP
HEF4050B HEX non-inverting buffers Philips
HEF4052B Dual 4-channel analogue multiplexer/demultiplexer NXP
HEF4052B Dual 4-channel analogue multiplexer/demultiplexer Philips

Other Datasheets by Nexperia

Part Number Description
HEF4051B 8-channel analog multiplexer/demultiplexer
HEF4050B Hex non-inverting buffers
HEF4050B-Q100 Hex non-inverting buffers
HEF4050BT Hex non-inverting buffers
HEF4052B Dual 4-channel analog multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF4051B-Q100 8-channel analog multiplexer/demultiplexer Rev. 2 — 11 September 2014 Product data sheet 1. General description The HEF4051B-Q100 is an 8-channel analog multiplexer/demultiplexer with three address inputs (S1 to S3), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). With E LOW, one of the eight switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3. If break before make is needed, then it is necessary to use the enable input.