Datasheet4U Logo Datasheet4U.com

HEF4052B-Q100 - Dual 4-channel analog multiplexer/demultiplexer

General Description

The HEF4052B-Q100 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 3.0 V to 15.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Fully static operation.
  • 5 V, 10 V, and 15 V parametric ratings.
  • Standardized symmetrical output characteristics.
  • ESD protection:.
  • MIL-STD-833, method 3015 exceeds 2000 V.

📥 Download Datasheet

Datasheet Details

Part number HEF4052B-Q100
Manufacturer Nexperia
File Size 288.01 KB
Description Dual 4-channel analog multiplexer/demultiplexer
Datasheet download datasheet HEF4052B-Q100 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HEF4052B Dual 4-channel analogue multiplexer/demultiplexer NXP
HEF4052B Dual 4-channel analogue multiplexer/demultiplexer Philips
HEF4050B HEX non-inverting buffers NXP
HEF4050B HEX non-inverting buffers Philips
HEF4051B 8-channel analogue multiplexer/demultiplexer NXP

Other Datasheets by Nexperia

Part Number Description
HEF4052B Dual 4-channel analog multiplexer/demultiplexer
HEF4052BT Dual 4-channel analog multiplexer/demultiplexer
HEF4050B Hex non-inverting buffers
HEF4050B-Q100 Hex non-inverting buffers
HEF4050BT Hex non-inverting buffers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF4052B-Q100 Dual 4-channel analog multiplexer/demultiplexer Rev. 3 — 15 December 2021 Product data sheet 1. General description The HEF4052B-Q100 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S1 and S2) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD.