Datasheet4U Logo Datasheet4U.com

HEF4053B - Triple single-pole double-throw analog switch

General Description

The HEF4053B is a triple single-pole double-throw (SPDT) analog switch, suitable for use as an analog or digital multiplexer/demultiplexer.

Each switch has a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).

Key Features

  • Fully static operation.
  • 5 V, 10 V, and 15 V parametric ratings.
  • Standardized symmetrical output characteristics.
  • Specified from 40 C to +125 C.
  • Complies with JEDEC standard JESD 13-B 3.

📥 Download Datasheet

Datasheet Details

Part number HEF4053B
Manufacturer Nexperia
File Size 821.47 KB
Description Triple single-pole double-throw analog switch
Datasheet download datasheet HEF4053B Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HEF4053B Triple single-pole double-throw analog switch NXP
HEF4053B Triple 2-channel analogue multiplexer/demultiplexer Philips
HEF4050B HEX non-inverting buffers NXP
HEF4050B HEX non-inverting buffers Philips
HEF4051B 8-channel analogue multiplexer/demultiplexer NXP

Other Datasheets by Nexperia

Part Number Description
HEF4053B-Q100 Triple single-pole double-throw analog switch
HEF4050B Hex non-inverting buffers
HEF4050B-Q100 Hex non-inverting buffers
HEF4050BT Hex non-inverting buffers
HEF4051B 8-channel analog multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HEF4053B Triple single-pole double-throw analog switch Rev. 12 — 25 March 2016 Product data sheet 1. General description The HEF4053B is a triple single-pole double-throw (SPDT) analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A HIGH on E causes all switches into the high-impedance OFF-state, independent of Sn. VDD and VSS are the supply voltage connections for the digital control inputs (Sn and E). The VDD to VSS range is 3 V to 15 V. The analog inputs/outputs (nY0, nY1 and nZ) can swing between VDD as a positive limit and VEE as a negative limit. VDD  VEE may not exceed 15 V.