NMUX27518E-Q100 Datasheet | Nexperia

6-channel, 1-of-2 multiplexer and demultiplexer Rev. 1 - 25 July 2025 Product data sheet 1. General description The NMUX27518E-Q100 is a bidirectional, 6-channel, 1:2 multiplexer-demultiplexer designed to operate from 1.62 V to 3.6 V. This device can handle both digital and analog signals, and can transmit signals up to VCC in either direction. The NMUX27518E-Q100 has two control pins (S0, S1), each controlling three 1:2 muxes at the same time, and an enable pin (EN) that put all outputs in high-impedance mode. The control pins are patible with 1.8 V logic thresholds and are backward patible with 2.5 V and 3.3 V logic thresholds. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 2) and is suitable for use in automotive applications. 2. Features and benefits - Automotive product qualification in accordance with AEC-Q100 (Grade 2) - Specified from -40 °C to +105 °C - Wide operating range: 1.62 V to 3.6 V - Isolation in power-down mode, VCC = 0 V - Low-capacitance switches, 21.5 p F (typical) - Bandwidth up to 240 MHz for high-speed rail-to-rail signal handling - Crosstalk and isolation OFF-state: - 62 d B - 1.8 V logic patible control inputs - 3.6 V tolerant control inputs - Latch-up performance exceeds 100 m A per JESD 78, Class II - ESD protection: - HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2 k V - CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1.5 k V - IEC61000-4-2, level 3, contact discharge on all n Yn pins exceeds ±6 k V - 24 pins TSSOP24 (7.8 x 4.4 x 1.1 mm body) and HWQFN24 (4 × 4 × 0.75 mm body) packages 3. Applications - Electronic Control Unit - q SPI memory multiplexing Nexperia 6-channel, 1-of-2 multiplexer and...