NXS0104-Q100 Datasheet | Nexperia

Dual supply translating transceiver; open drain; auto direction sensing Rev. 5 - 2 May 2022 Product data sheet 1. General description The NXS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It Features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits - Automotive product qualification in accordance with AEC-Q100 (Grade 1) - Specified from -40 °C to +85 °C and from -40 °C to +125 °C - Wide supply voltage range: - VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V - Maximum data rates: - Push-pull: 24 Mbps - IOFF circuitry provides partial Power-down mode operation - Inputs accept voltages up to 5.5 V - ESD protection: - HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 k V for A port - HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 k V for B port - MIL-STD-883, method 3015 Class 2 exceeds 2.5 k V for A port - MIL-STD-883, method 3015 Class 3B exceeds 15 k V for B port - IEC61000-4-2 contact discharge exceeds 8000 V for B port - Latch-up performance exceeds 100 m A per JESD 78B Class II - Multiple package options - DHVQFN package with...