onsemi ADP3207D
The ADP3207D is a high efficiency, multi−phase, synchronous, buck−switching regulator controller optimized for converting notebook battery voltage into the core supply voltage required by high performance Intel processors. The part uses an internal 7−bit Digital−to−Analog Converter (DAC) to read Voltage Identification (VID) code directly from the processor that sets the output voltage. The phase relationship of the output signals can be programmed to provide 1−, 2−, or 3−phase operation, allowing for the construction of up to three interleaved buck−switching stages.FEATURES
LFCSP40 CASE 932AC MARKING DIAGRAM ADP3207D AWLYYWWG A WL YYWW G = Assembly Location = Wafer Lot = Date Code = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 31 of this data sheet.● 1−, 2−, or 3−Phase Operation at Up to 750 kHz per Phase
● $7 mV Worst−Case Differential Sensing Error
● Input Voltage Range of 3.3 V to 22 V
● Interleaved PWM Outputs for Driving External High
●
●
●
● Overtemperature
● Independent Current Limit and Load Line Setting
●
●
●
●
●
● Power MOSFET Drivers Enhanced PWM FlexModet for Excellent Load Transient Performance Automatic Power−Saving Modes Maximize Efficiency During Light Load and Deeper Sleep Operation Soft Transient Control Reduces Inrush Current and Audio Noise Active Current Balancing Between Output Phases Inputs for Additional Design Flexibility Built−In, Power−Good Masking Supports VID OTF 7−Bit Digitally Programmable 0.3 V to 1.5 V Output Overload and Short−Circu...