onsemi AF0130
The AF0130 sensor version comes with a depth processing ASIC stacked below its pixel area which calculates depth, confidence and intensity maps at high speeds from its laser modulated exposures. The AF0131 sensor version does not come with on-chip depth processing but does come with the same performance. This sensor is for solutions which prefer their own depth calculations off-chip.| Part No. | AF0130 |
|---|---|
| Datasheet | AF0130 Download |
| Manufacturer |  onsemi |
| Description | 1.2MP Smart iToF 1/3.2-inch Stacked BSI Global Shutter Depth Sensor |
| Buy | Stock & Price |
FEATURES
● 1.2 MP CMOS Smart iToF Sensor with Advanced 3.5 mm Pixel Stacked BSI Technology● Superior Low-Light and Ambient-Light Performance
● Enhanced NIR Response at 850 nm and 940 nm Wavelength (QE > 40%)
● Dual Laser (Frequency) Operation for Increased Depth Range (Disambiguation) in VGA Resolution
● Low Voltage Differential Signal (LVDS) Driver for Modulation Control of 2 Lasers up to 200 MHz
● Two or Four-Wire Serial Interface for Register Access
● 2 Gbps/Lane, 2-lane MIPI CSI-2 D-PHY Data Interface
● Laser Eye Safety Monitoring
● Three Output Mode: RAW, Data Reduction (DR), Integrated Depth Processing (DP)
● Phase and Pulsed (Hybrid) Modulation Support
● Simultaneous Depth, Confidence and Grayscale Output
● Horizontal and Vertical Mirroring, Windowing and Pixel Binning
● Context State Machine with 64 Programmable Contexts
● Automatic Exposure Control (AEC)
● Pixel Identification & Correction (PDI & PDC)
● Multi Camera and Interference Mitigation
● Reduced Motion Artefacts due t...
