GENERAL DESCRIPTION
The onsemi Table 1. KEY PERFORMANCE PARAMETERS Parameter Value Primary camera interface Parallel Primary camera input format RAW12 Linear/Companded Bayer data Output interface Up to 20−bit Parallel (Note 1) Output format YUV422 8−bit, 10−bit, and SMPTE296M 10−, 12−bit tone−mapped Bayer Maximum resolution 1280 x 960 (1.2 Mp) Input clock range (Note 2) 6−30 MHz Maximum frame rate (Note 3) 45 fps at 1.2 Mp, 60 fps at 720 p Maximum output clock frequency Parallel clock up to 84 MHz Supply voltage Operating temperature (ambient − TA) Typical power consumption (Note 4) VDDIO_S VDDIO_H VDD_REG VDDIO_OTPM −30C to + 70C 1.8 or 2.8 V nominal 2.5 or 3.3 V nominal 1.8 V nominal 2.5 or 3.3 V nominal 130 mW 1. 20−bit in one pixel clock format is only available in SMPTE mode with the use of four GPIOs. 2. 3. Maximum frame rate depends on output interface and data format configuration used. 4. 720 p HDR 60 fps 74.25 MHz YCbCr_422_16 FEATURES
● Supports onsemi sensors with up to 1...
onsemi
