onsemi CAT310
The CAT310 is a 10−channel LED driver for automotive and other lighting applications. The LED bias current of each channel can be set independently using an external series ballast resistor, making the device ideal for multi−color instrumentation displays. The device offers a blanking control pin (BLANK) which can be used to disable all channels on demand.- Min Voltage : 3V
- Max Voltage : 5.5V
- Max Operating Temp : 125°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | CAT310 |
|---|---|
| Datasheet | CAT310 Download |
| Manufacturer |  onsemi |
| Description | LED Driver |
| Buy | Stock & Price |
DESCRIPTION
All LED output channels are driven from a low on−resistance open−drain High Voltage CMOS Nch−FETs and are fully compliant with “Load Dump” transients of up to 40 volts. A high−speed serial interface (suitable with both 3.3 volt and 5 volt systems) feeding a 10 bit shift register is used to program the desired state (on/off) of each channel. A serial output data pin (SOUT) is provided to daisy−chain devices in large cluster LED applications. During initial power up all channels are reset and cleared via an under−voltage lock out (UVLO) detector and for added protection all channels are disabled in the event of a battery over−voltage condition (19 volts or more).FEATURES
● Automotive “Load Dump” Protection (40 V)● 10 Independent LED Channels
● Up to 50 mA Output per Channel
● Overvoltage Detection at 19 V
● Serial Interface for Channel Programming
● Daisy Chain Output for Multi−driver Cascading
● LED Blanking Control
● Operating Temperature from −40°C to +125°C
● 20−pin SOI...
