onsemi FAN53745
The FAN53745 is a low quiescent current step−down DC/DC converter that delivers a regulated output voltage from an input supply of 2.3 V to 5.5 V. The combination of built−in power transistors, synchronous rectification, and a tiny solution size make the device ideal for portable applications. The converter normally operates in PWM Mode at a typical fixed−frequency of 3.33 MHz.| Part No. | FAN53745 |
|---|---|
| Datasheet | FAN53745 Download |
| Manufacturer |  onsemi |
| Description | Buck Regulator |
| Buy | Stock & Price |
DESCRIPTION
At moderate and light loads, the device will transition into PFM Mode to maintain high efficiency and excellent transient response. Additionally, a low power Shutdown Mode reduces power consumption when the device is disabled. The FAN53745 is available in 6−bump, 0.4 mm pitch, Wafer−Level Chip−Scale Package (WLCSP).FEATURES
● Proprietary Current Mode Architecture● Wide Input Voltage Range: 2.3 V to 5.5 V
● 1 A Load Capability
● PFM / PWM Modes for High Efficiency
● I2C−compatible Interface
● Programmable Output Voltage: 1.5 V to 3.3 V
● Programmable Current Limit: 440 mA to 2090 mA
● Internal Soft−Start
● Protection Faults (OT, Input UVLO, Output Short and Reverse Current)
● Automatic Pass−Through Operation
● Hardware Reset when Holding SCL Low
● Pb−Free and RoHS Compliant
APPLICATIONS
● Smart Phones● Smart Watch
● Health Monitoring
● Sensor Drive
● Energy Harvesting
● Utility and Safety Modules
● RF Modules DATA SHEET WLCSP6 CASE 567UH MARKING DIAGRAM 12KK XYZ 12 = Alph...
