onsemi FSUSB104
The FSUSB104 is a bi-directional, low -pow er, tw o-port, Hi-Speed, USB2.0 sw itch. The FSUSB104 is compatible w ith the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7 pF. The w ide bandw idth of this device (720 MHz) exceeds the bandw idth needed to pass the third harmonic, resulting in signals w ith minimum edge and phase distortion.| Part No. | FSUSB104 |
|---|---|
| Datasheet | FSUSB104 Download |
| Manufacturer |  onsemi |
| Description | Low-Power Two-Port Hi-Speed USB2.0 Switch |
| Buy | Stock & Price |
FEATURES
● Low On Capacitance: 3.7 pF Typical● Low On Resistance: 3.9 Ω Typical
● Low Pow er Consumption: 1 μA Maximum - 15 μA Maximum ICCT over an Expanded Voltage Range (VIN=1.8 V, VCC=4.3 V)
● Wide -3 db Bandw idth: > 720 MHz
● Packaged in Pb-free 10-Lead UMLP (1.4 x 1.8 mm)
● 8 kV ESD Rating, >16 kV Pow er/GND ESD Rating
● Pow er-Off Protection on All Ports When VCC=0 V - D+/D- Pins Tolerate up to 5.25 V
APPLICATIONS
● Cell phone, PDA, Digital Camera, and Notebook● LCD Monitor, TV, and Set-Top Box
DESCRIPTION
Configured as a double-pole, double-throw sw itch (DPDT) sw itch, it is optimized for sw itching betw een tw o Hi-Speed (480 Mbps) sources or a Hi-Speed and Full-Speed (12 Mbps) source. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB104 contains special circuitry on the sw itch I/O pins for applications w here the VCC supply is pow ered-off (VCC=0), w hich allow s the device to w ithstand an over-voltage condition. This device is designed to minimize current consumption even w hen the control voltage applied to the SEL pin is low er than the supply voltage (VCC).
