Datasheet4U.com

KAF-3200 Datasheet PDF

onsemi KAF-3200

The KAF−3200 Image Sensor is a high performance CCD (charge−coupled device) with 2184 (H) x 1472 (V) photoactive pixels designed for a wide range of image sensing applications. The sensor incorporates true two−phase CCD technology, simplifying the support circuits required to drive the sensor as well as reducing dark current without compromising charge capacity.
Part No. KAF-3200
Datasheet KAF-3200 Download
Manufacturer
onsemi
Description CCD Image Sensor
Buy Stock & Price
KAF-3200 datasheet page 1 preview

DESCRIPTION

The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture Full Frame CCD Total Number of Pixels 2184 (H) x 1510 (V) Number of Active Pixels 2184 (H) x 1472 (V) Pixel Size 6.8 mm (H) x 6.8 mm (V) Active Imager Size 14.85 mm (H) x 10.26 mm (V) 18 mm (diag), 4/3” optical format Optical Fill−Factor 100% Saturation Signal Output Sensitivity Readout Noise (1 MHz) Dark Current (25°C, Accumulation Mode) 55,000 electrons 12 mV/e− 7 electrons rms < 7 pA/cm2 Dark Current Doubling Rate 6°C Dynamic Range (Sat Sig / Dark Noise) 78 dB Quantum Efficiency with microlenses 55%, 70%, 80% (Red, Green, Blue) Maximum Data Rate 15 MHz Package CERDIP Package (sidebrazed) Cover Glass Clear or AR coated, 2 sides NOTE: Parameters above are specified at T = 25°C unless otherwise noted. Figure 1. KAF−3200 CCD Image Sensor Fea...