onsemi LB11946
The LB11946 is a stepping motor driver IC that implements PWM current control bipolar drive with a fixed off time. This IC features 15 current setting levels using a fixed VREF voltage and support for micro-stepping drive from 1-2 phase excitation drive to 4W1-2 phase excitation drive. This device is optimal for driving stepping motors such as those used for carriage drive and paper feed in printers.| Part No. | LB11946 |
|---|---|
| Datasheet | LB11946 Download |
| Manufacturer |  onsemi |
| Description | Stepping Motor Driver |
| Buy | Stock & Price |
FEATURES
● PWM current control (with a fixed off time)● Logic input serial-parallel converter (allows 1-2, W1-2, 2W1-2, and 4W1-2 phase excitation drive)
● Current attenuation switching function (with slow decay, fast decay, and mixed decay modes)
● Built-in upper and lower side diodes
● Simultaneous on state prevention function (through current prevention)
● Noise canceller function
● Thermal shutdown circuit
● Shutoff on low logic system voltage circuit
● Low-power mode control pin Specifications
MAXIMUM RATINGS
at Ta = 25°C Parameter Motor supply voltage Peak output current Continuous output current Logic system supply voltage Logic input voltage range Emitter output voltage Symbol VBB IO peak IO max VCC VIN VE Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg tw ≤ 20μS Conditions VCC = 5V specifications VCC = 3.3V specifications Independent IC Ratings 50 1.2 1.0 7.0 -0.3 to VCC 1.0 0.5 3.0 -25 to +85 -55 to +150 Unit V A A V V V V W °C °C Stresses exceedingMAXIMUM RATINGS
may damage the device.
