onsemi NBA3N206S
The NBA3N206S is a 3.3 V supply differential Multipoint Low Voltage (M−LVDS) line Driver and Receiver for automotive applications. The NBA3N206S has Type−2 receivers that detect the bus state with as little as 50 mV of differential input voltage over a common−mode voltage range of −1 V to 3.4 V. NBA3N206S offers the Type 2 receiver threshold at 0.1 V.| Part No. | NBA3N206S |
|---|---|
| Datasheet | NBA3N206S Download |
| Manufacturer |  onsemi |
| Description | 3.3V Automotive Grade M-LVDS Driver Receiver |
| Buy | Stock & Price |
DESCRIPTION
Type−2 receivers include an offset threshold to provide a detectable voltage under open−circuit, idle−bus, and other faults conditions. NBA3N206S supports Simplex or Half Duplex bus configurations.FEATURES
● Low−Voltage Differential 30 W to 55 W Line Drivers and Receivers for Signaling Rates Up to 200 Mbps● Type−2 Receivers Provide an Offset (100 mV) Threshold to Detect Open−Circuit and Idle−Bus Conditions
● Controlled Driver Output Voltage Transition Times for Improved Signal Quality
● −1 V to 3.4 V Common−Mode Voltage Range Allows Data Transfer With up to 2 V of Ground Noise
● Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V
● M−LVDS Bus Power Up/Down Glitch Free
● Operating range: VCC = 3.3 ±10% V( 3.0 to 3.6 V)
● Operation from –40°C to +125°C.
● AEC−Q100 Qualified and PPAP Capable
● These are Pb−Free Devices
APPLICATIONS
● Low−Power High−Speed Short−Reach Alternative to TIA/EIA−485● Backplane or Cabled Multipoint Data and Clock Transmission
● Cellular Base Stati...
