onsemi NCP1835
NCP1835 is an integrated linear charger specifically designed to charge 1−cell Li−Ion batteries with a constant current, constant voltage (CCCV) profile. It can charge at currents of up to 1.0 A. Its low input voltage capability, adjustable charge current, ability to maintain regulation without a battery, and its onboard thermal foldback make it versatile enough to charge from a variety of wall adapters.| Part No. | NCP1835 |
|---|---|
| Datasheet | NCP1835 Download |
| Manufacturer |  onsemi |
| Description | Integrated Li-Ion Charger |
| Buy | Stock & Price |
FEATURES
● Integrated Voltage and Current Regulation● No External MOSFET, Sense Resistor or Blocking Diode Required
● Charge Current Thermal Foldback
● Integrated Pre−charge Current for Conditioning Deeply Discharged Battery
● Integrated End−of−Charge (EOC) Detection
● 1% Voltage Regulation
● 4.2 V or 4.242 V Regulated Output Voltage
● Regulation Maintained without a Battery Present
● Programmable Full Charge Current 300 − 1000 mA
● Open−Drain Charger Status and Fault Alert Flags
● 2.8 V Output for AC Present Indication and Powering Charging Subsystems
● Minimum Input Voltage of 2.4 V Allows Use of Current Limited Adapters
● Automatically Recharging if Battery Voltage Drops after Charging Cycle is Completed
● Low Profile 3x3 mm DFN Package
● Pb−Free Packages are Available Typical
APPLICATIONS
● Cellular Phones● PDAs, MP3 Players
● Stand−Alone Chargers
● Battery Operated Devices MARKING DIAGRAMS 1 1835 4200 ALYWG G DFN 3x3 MN SUFFIX CASE 485C 1 1835 4242 ALYWG G 1835 = Device Code 420...
