onsemi NCP1910
the NCP1910 combines a state-of-the-art circuitry aimed to powering next generation of ATX or flat TVs converters. With a 65 or 100 kHz Continuous Conduction Mode Power Factor Controller and a LLC controller hosting a high-voltage driver, the NCP1910 is ready to power 85+ types of offline power supplies. These signals include a power-good line but also a control pin which turns the controller on and off via an opto coupler.| Part No. | NCP1910 |
|---|---|
| Datasheet | NCP1910 Download |
| Manufacturer |  onsemi |
| Description | High Performance Combo Controller |
| Buy | Stock & Price |
FEATURES
● Fixed-Frequency 65 or 100 kHz CCM Power Factor Controller 1● Average Current-Mode Control for Low Line Distortion
● Dynamic Response Enhancer Reduces Bulk Undershoot
● Independent Over Voltage Protection Sensing Pin with Latch-off XXXXX = Specific Device Code A = Assembly Location WL = Wafer Lot Capability
● Adjustable Frequency Fold Back Improves Light Load Efficiency
● Adjustable Line Brown-Out Protection with 50 ms Delay to Help YY = Year WW = Work Week G = Pb−Free Package Meeting Hold-up Time Specifications
● Programmable Over current Threshold Leads to an Optimized Sensing Resistor ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 35 of this data sheet.
● ±1 A peak Current Drive Capability
● LLC Controller Operates from 25 kHz to 500 kHz
● On Board 600 V High-Voltage Drivers
● Power Good Output Management Signal
● 1 A/0.5 A Sink/Source Capability
● A Version with Dual Ground Pinout (No Skip),
● Minimum Frequen...
