onsemi NCP340
The NCP340 is a low Ron N−channel MOSFET controlled by a soft−start sequence of 2 ms for mobile applications. The very low RDS(on) allows system supplying or battery charging up to DC 3A.The device is enable automatically if a Power Supply is connected on Vin pin (active High) and maintained off if no Vin (internal pull down).| Part No. | NCP340 |
|---|---|
| Datasheet | NCP340 Download |
| Manufacturer |  onsemi |
| Description | Soft-Start Controlled Load Switch |
| Buy | Stock & Price |
FEATURES
● 1.8 V − 5.5 V Operating Range● 30 mW N−MOSFET
● DC Current Up to 3 A
● Built−in Soft−Start 2 ms
● Reverse Voltage Protection
● Active High with Integrated Bridge
● Compliance to IEC61000−4−2 (Level 4) 8.0 kV (Contact) 15 kV (Air)
● ESD Ratings: Machine Model = B Human Body Model = 3
● mDFN4 1.2 x 1.6 mm
● This is a Pb−Free Device Typical
APPLICATIONS
● Mobile Phones● Tablets
● Digital Cameras
● GPS
● Computers Vbat TVS ESD9x EN IN OUT NCP340 EN GND 1 mF 1 UDFN4 CASE 517CE MARKING DIAGRAM 34 M 34 = Specific Device Code M = Date Code PINOUT IN GND PAD1 OUT EN (Top View) ORDERING INFORMATION See detailed ordering and shipping information on page 8 of this data sheet. VBUS USB D+ 4 Port D− GND IN CMIC OUT Supply HS Monitoring USB I@C Signal Routing Accessory Detection and ID SBC Charger SYSTEM Figure 1. Typical Application Circuit © Semiconductor Components Industries, LLC, 2013 1 June, 2013 − Rev. 0 Publication Order Number: NCP340/D NCP340 PIN FUNCTION
DESCRIPTION
Pin Name P...
