onsemi NCP5318
The NCP5318 provides full−featured and flexible control conforming to the Intel® VRM 10.1 specification for high−performance CPUs. The IC can be programmed as a two−, three− or four−phase buck controller, and the per−phase switching frequency can be as high as 1.0 MHz. This control scheme provides fast transient response, reducing the need for large banks of output capacitors and higher switching frequency.| Part No. | NCP5318 |
|---|---|
| Datasheet | NCP5318 Download |
| Manufacturer |  onsemi |
| Description | Two/Three/Four-Phase Buck CPU Controller |
| Buy | Stock & Price |
FEATURES
● Switching Regulator Controller ♦ Programmable 2/3/4 Phase Operation ♦ Lossless Current Sensing ♦ Enhanced V2 Control Method Provides Fast Transient Response ♦ Programmable Up to 1.0 MHz Switching Frequency Per Phase ♦ Programmable Adaptive Voltage Positioning ♦ Programmable Soft−Start Time● Current Sharing ♦ Differential Current Sense Pins for Each Phase ♦ Current Sharing Within 10% Between Phases
● Protection
FEATURES
♦ Programmable Latching Overcurrent Protection ♦ “111110” and “111111” DAC Code Fault ♦ Latched Overvoltage Protection ♦ Undervoltage Lockout ♦ External Enable Control ♦ Three−State MOSFET Driver Control through DRVON Signal● System Power Management ♦ 6−Bit DAC with 0.5% Tolerance Compatible with VRM 10.1 Specification ♦ Programmable Lower Power Good Threshold ♦ Power Good Output with Delay ♦ Pre−set No Load Offset Voltage
● Pb−Free Package is Available* *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
