onsemi NCP6336
The NCP6336 is a synchronous buck converter optimized to supply the different sub systems of portable applications powered by one cell Li−Ion or three cell Alkaline/NiCd/NiMH batteries. The device is able to deliver up to 5.0 A, with programmable output voltage from 0.6 V to 1.5 V. It can share the same output rail with another DC−to−DC converter and works as a transient load helper.- Min Voltage : 2.3V
- Max Voltage : 5.5V
- Channels : 1
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | NCP6336 |
|---|---|
| Datasheet | NCP6336 Download |
| Manufacturer |  onsemi |
| Description | Configurable 5.0A Step Down Converter |
| Buy | Stock & Price |
FEATURES
● Input Voltage Range from 2.3 V to 5.5 V: Battery and 5 V Rail PoweredAPPLICATIONS
● Programmable Output Voltage: 0.6 V to 1.5 V in 10 mV Steps● 3 MHz Switching Frequency with On Chip Oscillator
● Uses 330 nH Inductor and 47 mF Capacitors for Optimized Footprint and Solution Thickness
● PFM/PWM Operation for Optimum Increased Efficiency
● Low 35 mA Quiescent Current
● I2C Control Interface with Interrupt and Dynamic Voltage Scaling Support
● Enable Pins, Power Good / Fail Signaling
● Thermal Protections and Temperature Management
● Transient Load Helper: Share the Same Rail with Another Rail
● Small 2.0 x 1.6 mm / 0.4 mm Pitch CSP Package
● These are Pb−Free Devices MARKING DIAGRAM WLCSP20 CASE 568AG 6336x AWLYWW G x = P: Prototype = blank: Production A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week G = Pb−Free Package Pb−Free indicator, G or microdot (G), may or may not be present 1 A VSEL PIN OUT 23 EN SCL 4 FB B SDA PGND INTB* PGND PG* AGND C PGND PGND PGND P...
