onsemi NCP81610
The NCP81610 is a multiphase synchronous controller optimized for new generation computing and graphics processors. The device is capable of driving up to 8 phases and incorporates differential voltage and phase current sensing, adaptive voltage positioning and PWM_VID interface to provide and accurately regulated power for computer or graphic controllers. The integrated power saving interface (PSI) allows for the processors to set the controller in one of three modes, i.e.| Part No. | NCP81610 |
|---|---|
| Datasheet | NCP81610 Download |
| Manufacturer |  onsemi |
| Description | 8/7/6/5/4/3/2/1 Multi-Phase Buck Controller |
| Buy | Stock & Price |
DESCRIPTION
all phases on, dynamic phases shedding or fixed low phase count mode, to obtain high efficiency in light−load conditions. The dual edge PWM multiphase architecture ensures fast transient response and good dynamic current balance.FEATURES
● Compliant with NVIDIA OVR4i+ Specifications● Supports up to 8 Phases
● 2.8 V to 20 V Supply Voltage Range:
● 250 kHz to 1.2 MHz Switching Frequency (8 Phase)
● Power Good Output
● Under Voltage Protection (UVP)
● Over Voltage Protection (OVP)
● Per Phase Over Current Limiting (OCL)
● System Over Current Protection (OCP)
● Startup into Pre−Charged Loads while Avoiding False OVP
● Configurable Load Line
● High Performance Operational Error Amplifier
● True Differential Current Balancing Sense Amplifiers for Each Phase
● Phase−to−Phase Dynamic Current Balancing
● Current Mode Dual Edge Modulation for Fast Initial Response to Transient Loading
● Power Saving Interface (PSI)
● Automatic Phase Shedding with User Settable Thresholds
● PWM_VID...
