onsemi NCS1002
The NCS1002 is a highly integrated solution for Switching Mode Power Supply (SMPS) applications requiring a dual control loop to perform Constant Voltage (CV) and Constant Current (CC) regulation. The NCS1002 integrates a 2.5 V voltage reference and two precision op amps. The voltage reference, along with Op Amp 1, is the core of the voltage control-loop.| Part No. | NCS1002 |
|---|---|
| Datasheet | NCS1002 Download |
| Manufacturer |  onsemi |
| Description | Constant Voltage/Constant Current Secondary-Side Controller |
| Buy | Stock & Price |
DESCRIPTION
Op Amp 2 is an independent, uncommitted amplifier specifically designed for the current control. Key external components needed to complete the two control loops are: (a) A resistor divider that senses the output of the power supply (battery charger) and fixes the voltage regulation set point at the specified value. (b) A sense resistor that feeds the current sensing circuit with a voltage proportional to the DC output current. This resistor determines the current regulation set point and must be adequately rated in terms of power dissipation. The NCS1002 comes in a small 8−pin SOIC package and is ideal for space-shrunk applications such as battery chargers.FEATURES
● Low Input Offset Voltage: 0.5 mV, Typ● Input Common-Mode Range includes Ground
● Low Quiescent Current: 300 mA per Op Amp at VCC = 5 V
● Large Output Voltage Swing
● Wide Power Supply Range: 3 V to 32 V
● High ESD Protection: 2 kV
● These are Pb−Free Devices Typical
APPLICATIONS
● Battery Chargers● Switch M...
