onsemi NCV57302
The ENABLE pin input voltage must be 0.8 V or VIN must be connected to ground potential. This device series incorporates ESD protection and is tested by the following methods: ESD Human Body Model (HBM) tested per AEC*Q100*002 (EIA/JESD22*A114C) ESD Machine Model (MM) tested per AEC*Q100*003 (EIA/JESD22*A115C) This device contains latch*up protection and exceeds 100 mA per JEDEC Standard JESD78.| Part No. | NCV57302 |
|---|---|
| Datasheet | NCV57302 Download |
| Manufacturer |  onsemi |
| Description | Very Low-Dropout (VLDO) Fast Transient Response Regulator |
| Buy | Stock & Price |
FEATURES
● Output Current in Excess of 3.0 A● Minimum Operating Input Voltage 1.8 V for Full 3 A Output Current
● 315 mV Typical Dropout Voltage at 3.0 A
● Adjustable Output Voltage Range from 1.24 V to 13 V
● Low Ground Current
● Fast Transient Response
● Stable with Ceramic Output Capacitor
● Logic Compatible Enable Pin
● Current Limit, Reverse Current and Thermal Shutdown Protection
● Operation up to 13.5 V Input Voltage
● NCV Prefix for Automotive and Other
APPLICATIONS
Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable● These are Pb−Free Devices
APPLICATIONS
● Consumer and Industrial Equipment Point of Regulation● Servers and Networking Equipment
● FPGA, DSP and Logic Power supplies
● Switching Power Supply Post Regulation
● Battery Chargers
● Functional Replacement for Industry Standard MIC29300, MIC39300, MIC37300 with Improved Minimum Input Voltage Specification MARKING DIAGRAMS TAB 1 5 D2PAK CASE 936A y 57302 AWLYWWG 1 EN VIN GND VOUT...
