onsemi NCV7351
The NCV7351 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. The NCV7351 is an addition to the CAN high-speed transceiver family complementing NCV734x CAN stand-alone transceivers and previous generations such as AMIS42665, AMIS3066x, etc.| Part No. | NCV7351 |
|---|---|
| Datasheet | NCV7351 Download |
| Manufacturer |  onsemi |
| Description | High Speed CAN Transceiver |
| Buy | Stock & Price |
FEATURES
● Compatible with the ISO 11898-2 Standard● High Speed (up to 1 Mbps)
● NCV7351F Version Has Specification for Loop Delay Symmetry (up to 2 Mbps according to ISO11898-2, up to 5 Mbps for information only)
● VIO Pin on NCV7351(F)D13 Version Allowing Direct Interfacing with 3 V to 5 V Microcontrollers
● EN Pin on NCV7351D1E Version Allowing Switching the Transceiver to a Very Low Current OFF Mode
● Excellent Electromagnetic Susceptibility (EMS) Level Over Full Frequency Range. Very Low Electromagnetic Emissions (EME) Low EME also Without Common Mode (CM) Choke
● Bus Pins Protected Against >15 kV System ESD Pulses
● Transmit Data (TxD) Dominant Time-out Function
● Under all Supply Conditions the Chip Behaves Predictably. No Disturbance of the Bus Lines with an Unpowered Node
● Bus Pins Short Circuit Proof to Supply Voltage and Ground
● Bus Pins Protected Against Transients in an Automotive Environment
● Thermal Protection
● These are Pb-Free Devices Quality
● NCV Prefix for Auto...
