onsemi NCV7381
NCV7381 is a single−channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side. It offers excellent EMC and ESD performance.| Part No. | NCV7381 |
|---|---|
| Datasheet | NCV7381 Download |
| Manufacturer |  onsemi |
| Description | FlexRay Bus Driver |
| Buy | Stock & Price |
FEATURES
General● Compliant with FlexRay Electrical Physical Layer Specification Rev 3.0.1
● FlexRay Transmitter and Receiver in Normal−power Modes for Communication up to 10 Mbit/s
● Support of 60 ns Bit Time
● FlexRay Low−power Mode Receiver for Remote Wakeup Detection
● Excellent Electromagnetic Susceptibility (EMS) Level over Full Frequency Range. Very Low Electromagnetic Emissions (EME)
● Bus Pins Protected against >10 kV System ESD Pulses
● Safe Behavior under Missing Supply or No Supply Conditions
● Interface Pins for a Protocol Controller and a Host (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
● INH Output for Control of External Regulators
● Local Wakeup Pin WAKE
● TxEN Time−out
● BGE Feedback
● Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up: ♦ VBAT Supply Parametrical Range from 5.5 V to 50 V ♦ VCC Supply Parametrical Range from 4.75 V to 5.25 V ♦ VIO Supply Parametrical Range from 2.3 V to 5.25 V
● Compatible with 14 V and 28 V Systems
● Operating Ambient Temper...
