onsemi NCV7729
The NCV7729 is an intelligent, fully protected H−Bridge Driver designed specifically for control of DC and stepper motors in safety critical applications under automotive/industrial environment.| Part No. | NCV7729 |
|---|---|
| Datasheet | NCV7729 Download |
| Manufacturer |  onsemi |
| Description | 8A H-Bridge Driver |
| Buy | Stock & Price |
FEATURES
● Operating VS Battery Supply Voltage 5 V to 28 V● Operating VCC Supply Voltage 3.0 to 5.5 V
● 18 V Survivability on VCC and All Logic I/O Pins
● Typical RDS(on) = 150 mW, RDS(MAX) = 300 mW (150°C)
● Continuous DC Load Current 5A (TC < 100°C)
● Selectable Output Current Limitation (2.5 A to 9.6 A)
● Output Switching Frequency Up to 30 kHz
● Monitoring of All Supply Voltages, Safe Power−up State
● Loss of GND Detection
● Short−Circuit Protection and Thermal Shutdown
● Full Diagnosis Capability for Open Load, Short to GND/VS and Shorted Load Conditions
● SPI Interface for Configuration and Diagnosis
● Undervoltage Lockout
● Regulated Charge Pump for Optimized EMI Behavior
● NCV Prefix for Automotive and Other
APPLICATIONS
Requiring Unique Site and Control Change Requirements● This is a Pb−Free Device Typical
APPLICATIONS
● Automotive ♦ Electronic Throttle Control (ETC) ♦ Variable Intake Geometry ♦ Exhaust Gas Recirculation ♦ Variable Swirl ♦ Blow−off Flap● Industrial PSOP−20...
