onsemi P2782
P278xA is available in an 8 pin SOIC Package source, which provides system wide reduction of EMI of all clock dependent signals. The P278xA allows significant system cost savings by reducing the number of circuit board layers and shielding that are traditionally required to pass EMI regulations. The P278xA uses the most efficient and optimized modulation profile approved by the FCC.- Min Voltage : 3V
- Max Voltage : 3.6V
- Max Operating Temp : 70°C
- Min Operating Temp : 0°C
Source:
Octopart
| Part No. | P2782 |
|---|---|
| Datasheet | P2782 Download |
| Manufacturer |  onsemi |
| Description | General Purpose EMI Reduction IC |
| Buy | Stock & Price |
FEATURES
● Provides up to 15dB of EMI suppression● FCC approved method of EMI attenuation
● Generates a 1X, 2X, and 4X low EMI spread spectrum clock of the input frequency
● Input frequency range from 3 to 78MHz
● External loop filter for spread % adjustment
● Spreading ranges from ±0.25% to ±5.0%
● Ultra low cycle-to-cycle jitter
● Zero-cycle slip
● 3.3V operating voltage range
● Ultra-low power CMOS design
● The P278xA modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock and, more importantly, decreases the peak amplitudes of its harmonics. This result in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most frequency generators. Lowering EMI by increasing a signal’s bandwidth is called spread spectrum clock generation. Product
DESCRIPTION
The P278xA is a versatile spread spectrum frequency modulator designed specifically for digital camera and other digital video and imaging applications.
