Datasheet4U Logo Datasheet4U.com

CMD242 Datasheet Distributed Amplifier

Manufacturer: Qorvo

Overview: CMD242 ® DC-40 GHz Distributed Amplifier Product Overview The CMD242 is wideband GaAs MMIC distributed low noise amplifier die which operates from DC to 40 GHz. The amplifier delivers greater than 10.5 dB of gain with a corresponding noise figure of 4.4 dB and output 1 dB compression point of 18.0 dBm at 20 GHz. The CMD242 is a 50 ohm matched design which eliminates the need for RF port matching. The CMD242 offers full passivation for increased reliability and moisture protection.

Datasheet Details

Part number CMD242
Manufacturer Qorvo
File Size 374.94 KB
Description Distributed Amplifier
Datasheet CMD242-qorvo.pdf

General Description

25 Piece WP Sample 234 Vgg2 ACG1 ACG2 5 RFOUT & Vdd 1 RFIN Vgg ACG4 ACG3 876 Note: Vgg2 is optional for gain control Electrical Performance (Vdd = 8.0 V, Vgg = -0.32 V, TA = 25o C, F = 20 GHz) ) )Parameter Frequency Range Min Typ Max DC - 40 Units GHz )Gain )Noise Figure Input Return Loss 11 dB 4.4 dB 18 dB Output Return Loss 18 dB Output P1dB 18 dBm Output IP3 27 dBm Supply Current 100 mA Data Sheet Rev.

B, May 31, 2022 | Subject to change without notice 1 of 12 www.qorvo.com ® Absolute Maximum Ratings Parameter Rating Drain Voltage, Vdd 10 V Gate Voltage, Vgg -2.5 to 0 V RF Input Power +23 dBm Channel Temperature, Tch 150° C Power Dissipation, Pdiss 1.05 W Thermal Resistance, QJC 62.1° C/W Operating Temperature -55 to 85° C Storage Temperature -55 to 150° C Exceeding any one or combination of the maximum ratings may cause permanent damage to the device.

CMD242 DC-40 GHz Distributed Amplifier Recommended Operating Conditions Parameter Min Typ Max Units Vdd 5.0 8.0 8.5 V Idd 100 mA Vgg -0.32 V Electrical performance is measured at specific test conditions.

Key Features

  • Ultra Wideband Performance.
  • Low Current Consumption.
  • Excellent Return Losses.
  • Small Die Size Ordering Information Part No. CMD242.

CMD242 Distributor