TM56M152A
Description
1. New generation
1. Delete “parator Characteristics”
1. Modify Specification: RAM size, PWM clock source, ADC 1.2V Vref, POR 1.53V, Port Change Interrupt
1. update the block diagram of ADC 2. update the typical value of I/O port sink current 3. update the high sink value in the table of “Family Overview
” 4. change the RAM size as 128B in the figure of block diagram 5. delete “1.2V/2V ADC Vref” in the section of FEATURES
. 6. Modify the writing value of ADCTL2 in the example of ADC.
1. Add all port pins into the column of ext. interrupt in the table of pin summary 2. typo: modify POR of TM56M1522 as 1.81V in the table of “FAMILY OVEROVEW” 3. Update LVRth and LVDth in the table of “FAMILY OVEROVEW” 4. Add “PWMCKS=FIRC- 1” as the condition of “Operating Voltage” in the chapter of FEATURES
5. Add the POR Voltage Electrical Characteristics 6. Add VPP into the table of “PIN DESCRIPTIONS” 7. Rename PA7 as PA7(VPP) in “PIN DESCRIPTIONS” 8. typo: correct the reset value of bit 5 as...
