| Part Number | 1N5237 Datasheet |
|---|---|
| Manufacturer | Zowie |
| Overview | Zowie Technology Corporation SILICON PLANAR ZENER DIODES 1N5220...1N5267 Standard Zener voltage tolerance is ± 20%. Add suffix "A" for ± 10% Tolerance, suffix "B" for ± 5% tolerance, suffix "C" for ± . . |
1N5237 Datasheet and Specifications PDF
The 1N5237 is a SILICON PLANAR ZENER DIODES.
Key Specifications
| Mount Type | Through Hole |
|---|---|
| Pins | 2 |
| Height | 2.29 mm |
| Length | 5.08 mm |
| Width | 2.29 mm |
| Max Operating Temp | 200 °C |
| Min Operating Temp | -65 °C |
| Part Number | 1N5237 Datasheet |
|---|---|
| Description | SILICON PLANAR ZENER DIODES |
| Manufacturer | JINAN JINGHENG |
| Overview | R SEMICONDUCTOR 1N5220 THRU 1N5281 0.5W SILICON PLANAR ZENER DIODES FEATURES DO-35 Standard zener voltage tolerance is ±20%.Add suffix "A" for ±10% tolerance and suffix "B" for ±5% tolerance , suf. DO-35 Standard zener voltage tolerance is ±20%.Add suffix "A" for ±10% tolerance and suffix "B" for ±5% tolerance , suffix "C"for ±2% tolerance. Other tolerance, non standard and higher zener voltages are upon request. High temperature soldering guaranteed:260℃/10 seconds at terminals Component in. |
| Part Number | 1N5237 Datasheet |
|---|---|
| Description | ZENER DIODES |
| Manufacturer | General Semiconductor |
| Overview |
1N5225 THRU 1N5267
ZENER DIODES
FEATURES
DO-35
min. 1.083 (27.5)
♦ Silicon Planar Power Zener Diodes ♦ Standard Zener voltage tolerance is ± 5% with a “B” suffix. Other tolerances are available upon .
DO-35
min. 1.083 (27.5)
* Silicon Planar Power Zener Diodes * Standard Zener voltage tolerance is ± 5% with a “B” suffix. Other tolerances are available upon request. max. ∅.079 (2.0) Cathode Mark min. 1.083 (27.5) * These diodes are also available in Mini-MELF case with the type designation ZMM5. |
| Part Number | 1N5237 Datasheet |
|---|---|
| Description | SILICON PLANAR ZENER DIODES |
| Manufacturer | SEMTECH |
| Overview | 1N5220...1N5281 SILICON PLANAR ZENER DIODES Standard Zener voltage tolerance is ± 20%. Add suffix "A" for ± 10% Tolerance, suffix "B" for ± 5% tolerance, suffix "C" for ± 2% tolerance, Other tolerance. . |