74ALVCH16373 Datasheet

The 74ALVCH16373 is a 2.5V/3.3V 16-bit D-type transparent latch.

Datasheet4U Logo
Part Number74ALVCH16373
ManufacturerNXP Semiconductors
Overview The 74ALVCH16373 is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-State outputs for bus oriented applications. Incorporates bus hold data inputs which elimina.
* Wide supply voltage range of 1.2V to 3.6V
* Complies with JEDEC standard no. 8-1A
* CMOS low power consumption
* MULTIBYTETM flow-through standard pin-out architecture
* Low inductance multiple VCC and ground pins for minimum noise and ground bounce PIN CONFIGURATION 1OE 1Q0 1Q1 GND 1Q2 1Q3 VCC .
Part Number74ALVCH16373
DescriptionLow Voltage 16-Bit Transparent Latch
ManufacturerFairchild Semiconductor
Overview The ALVCH16373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear to be transparent to the . s 1.65V to 3.6V VCC supply operation s 3.6V tolerant control inputs and outputs s Bushold on data inputs eliminates the need for external pull-up/pull-down resistors s tPD (In to On) 3.6 ns max for 3.0V to 3.6V VCC 4.5 ns max for 2.3V to 2.7V VCC 6.8 ns max for 1.65V to 1.95V VCC s Uses patented noi.
Part Number74ALVCH16373
Description16-bit D-type transparent latch
ManufacturerNexperia
Overview The 74ALVCH16373 is a 16-bit D-type transparent latch with bus hold inputs and 3-state outputs. The device can be used as two 8-bit transparent latches or a single 16-bit transparent latch. The device. two latch enables (1LE and 2LE) and two output enables (1OE and 2OE), each controlling 8-bits. When nLE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When nLE is LOW the latches st.