| Part Number | 74HC273D Datasheet |
|---|---|
| Manufacturer | Toshiba |
| Overview | • Octal D-Type Flip-Flop with Clear 2. General The 74HC273D is a high speed CMOS OCTAL D-TYPE FLIP FLOP fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to e. (1) High speed: fMAX = 67 MHz (typ.) at VCC = 5 V (2) Low power dissipation: ICC = 4.0 µA (max) at Ta = 25 (3) Balanced propagation delays: tPLH ≈ tPHL (4) Wide operating voltage range: VCC(opr) = 2.0 V to 6.0 V 4. Packaging SOIC20 ©2016 Toshiba Corporation 1 Start of commercial production 2016. |
74HC273D Datasheet and Specifications PDF
The 74HC273D is a Octal D-Type Flip-Flop.
Key Specifications
| Package | SOP |
|---|---|
| Pins | 20 |
| Operating Voltage | 5 V |
| Max Voltage (typical range) | 6 V |
| Min Voltage (typical range) | 2 V |
| Clock Edge Trigger | Positive Edge |
| Length | 12.8 mm |
| Width | 7.5 mm |
| Part Number | 74HC273D Datasheet |
|---|---|
| Description | Octal D-type flip-flop |
| Manufacturer | Nexperia |
| Overview | The 74HC273; 74HCT273 is an octal positive-edge triggered D-type flip-flop. The device features clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their corresponding Dn . clock (CP) and master reset (MR) inputs. The outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A LOW on MR forces the outputs LOW independently of clock and data inputs. Inputs include clamp dio. |