| Part Number | 74HC574D Datasheet |
|---|---|
| Manufacturer | Nexperia |
| Overview | The 74HC574; 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of . a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does . |
74HC574D Datasheet and Specifications PDF
The 74HC574D is a Octal D-type flip-flop.
Key Specifications
| Package | SOP |
|---|---|
| Mount Type | Surface Mount |
| Pins | 20 |
| Operating Voltage | 5 V |
| Max Voltage (typical range) | 6 V |
| Min Voltage (typical range) | 2 V |
| Logic Function | D-Type |
| Clock Edge Trigger | Positive Edge |
| Part Number | 74HC574D Datasheet |
|---|---|
| Description | Octal D-Type Flip-Flop |
| Manufacturer | Toshiba |
| Overview |
• Octal D-Type Flip Flop with 3-State Outputs
2. General
The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. It achieves the high speed.
(1) Wide operating temperature range: Topr = -40 to 125 * (Note 1) (2) High speed: fMAX = 59 MHz (typ.) at VCC = 6.0 V (3) Low power dissipation: ICC = 4.0 µA (max) at Ta = 25 * (4) Balanced propagation delays: tPLH ≈ tPHL (5) Wide operating voltage range: VCC(opr) = 2.0 V to 6.0 V Note 1: Operating. |