| Part Number | 74HCT374 Datasheet |
|---|---|
| Manufacturer | Nexperia |
| Overview | The 74HC374; 74HCT374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of . a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does . |
74HCT374 Datasheet PDF
The 74HCT374 is a Octal D-type flip-flop.
| Part Number | 74HCT374 Datasheet |
|---|---|
| Description | Octal D-Type Flip-Flop |
| Manufacturer | Texas Instruments |
| Overview |
• Buffered Inputs
• Common Three-State Output Enable Control
• Three-State Outputs
• Bus Line Driving Capability
• Typical Propagation Delay (Clock to Q) = 15ns at VCC = 5V, CL = 15pF, TA = 25oC
• Fa.
Description
* Buffered Inputs * Common Three-State Output Enable Control * Three-State Outputs * Bus Line Driving Capability * Typical Propagation Delay (Clock to Q) = 15ns at VCC = 5V, CL = 15pF, TA = 25oC * Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL. |
| Part Number | 74HCT374 Datasheet |
|---|---|
| Description | Octal D-type flip-flop |
| Manufacturer | Philips Semiconductors |
| Overview |
The 74HC/HCT374 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = .
* 3-state non-inverting outputs for bus oriented applications * 8-bit positive, edge-triggered register * Common 3-state output enable input * Independent register and 3-state buffer operation * Output capability: bus driver * ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT374 are high-speed Si-g. |