The A1156 is a Two Wire Hall-Effect Switches.
| Mount Type | Surface Mount |
|---|---|
| Pins | 3 |
| Max Voltage (typical range) | 24 V |
| Min Voltage (typical range) | 3 V |
| Output Type (varies by manufacturer) | Digital |
| Height | 1 mm |
| Length | 2.98 mm |
| Max Operating Temp | 150 °C |
| Part Number | A1156 Datasheet |
|---|---|
| Manufacturer | Allegro MicroSystems |
| Overview |
The A1150, A1152, A1153, A1155, A1156, A1157, and A1158 comprise a family of two-wire, unipolar, Hall-effect switches, which are factory-trimmed to optimize magnetic switchpoint accuracy.These devices.
AND BENEFITS
* AEC-Q100 automotive qualified * High-speed, 4-phase chopper stabilization * Low switchpoint drift throughout temperature range * Low sensitivity to thermal and mechanical stresses * On-chip protection * Supply transient protection * Reverse-battery protection * On-board voltage regula. |
| Part Number | A1156 Datasheet |
|---|---|
| Description | 2SA1156 |
| Manufacturer | NEC |
| Overview | . . |
| Seller | Inventory | Price Breaks | Buy |
|---|---|---|---|
| Rochester Electronics | 9126 | 100+ : 0.7131 USD 500+ : 0.6418 USD 1000+ : 0.5919 USD 10000+ : 0.5277 USD |
View Offer |
| DigiKey | 0 | 30000+ : 0.60202 USD | View Offer |
| Future Electronics | 0 | 10000+ : 0.56 USD | View Offer |
| Part Number | Manufacturer | Description |
|---|---|---|
| A1156-F | Allegro MicroSystems | Chopper-Stabilized Two-Wire Hall-Effect Switches |
| A11560 | AMT | Bandpass SAW Filter |