| Part Number | LA4440 Datasheet |
|---|---|
| Manufacturer | SANYO |
| Overview |
of External Parts C1 (C2) · Feedback capacitor : The low cutoff frequency depends on this capacitor. If the capacitance value is increased, the starting time is delayed. C3 (C4) · Bootstrap capacitor .
* Built-in 2 channels (dual) enabling use in stereo and bridge amplifier applications. Dual : 6W×2 (typ.) Bridge : 19W (typ.) * Minimun number of external parts required. * Small pop noise at the time of power supply ON/OFF and good starting balance. * Good ripple rejection : 46dB (typ.) * Good chan. |
LA4440 Datasheet and Specifications PDF
The LA4440 is a Power Amplifier.
Key Specifications
| Max Voltage (typical range) | 6 V |
|---|---|
| Min Voltage (typical range) | 4.5 V |
| Length | 36.8 mm |
| Width | 4.5 mm |
| Max Operating Temp | 75 °C |
| Min Operating Temp | -20 °C |
| Part Number | LA4440 Datasheet |
|---|---|
| Description | Power Amplifier |
| Manufacturer | onsemi |
| Overview |
of External Parts
• C1 (C2) − Feedback Capacitor:
The low cutoff frequency depends on this capacitor. If the capacitance value is increased, the starting time is delayed.
• C3 (C4) − Bootstrap Capacit.
* Built-in 2 Channels (Dual) Enabling Use in Stereo and Bridge Amplifier Applications. Dual : 6 W × 2 (typ) Bridge : 19 W (typ) * Minimum Number of External Parts Required * Small Pop Noise at the Time of Power Supply ON/OFF and Good Starting Balance * Good Ripple Rejection: 46 dB (typ) * Good Chann. |