LCE22A Datasheet and Specifications PDF

Value V WM Stand-Off Voltage PPPM IPPM CJ Peak Pulse Power Dissipation on 10/1000 us waveform(Note) Peak Pulse current on 10/1000 us waveform Max. Junction Capacitanc.

* Stand-off voltage from 6.5 to 90 volts
* Low Capacitance
* 1500W Peak Pulse Power capability on 10/1000 μs waveform repetition rate(duty cycle): 0.05%
* Fast response time: typically less than 1.0ps from 0v to VBR
* High temperature soldering guaranteed 265°C/10 seconds /.037" (9.5mm) lead len.

LCE SERIES VBR : 6.5 - 90 Volts PPK : 1500 Watts FEATURES : * 1500W Peak Pulse Surge reverse capability on 10/1000µs waveform * Excellent clamping capability * Low incremental surge resistance * Fast .

: * 1500W Peak Pulse Surge reverse capability on 10/1000µs waveform * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less than 5.0 ns from 0 volts to BV LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR DO-201 0.21 (5.33) 0.19 (4.83) 1.00 (25.4) MIN. .

LCE series LCE SERIES (1500 WATT) AXIAL TRANSIENT VOLTAGE SUPPRESSORS (LOW CAPACITANCE DEVICE) Device for data line interface circuit protection, the LCE series offers low shunt capacitance to preven.

G Stand-off voltage range 6.5 to 90 Volts G Uni-directional G Glass passivated junction G Low capacitance: 100pF (max) G Low zener impedance G 100% surge tested MAXIMUM RATING G Peak Pulse Power (Ppk): 1500 Watts (10 x 1000µs)@25°C (see diagram on page 3 for wave form) G 5 watt steady state G Respon.

The LCE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features u Glass pa.

u Glass passivated chip u 1500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and ot.