M66013FP Datasheet and Specifications PDF

The M66013FP is a 8-bit I/O Expander.

Key Specifications

PackageSOP
Pins20
Operating Voltage5 V
Max Voltage (typical range)5.5 V
Min Voltage (typical range)4.5 V
Height2.1 mm
Length12.6 mm
Width5.3 mm
🏠
Part NumberM66013FP Datasheet
ManufacturerRenesas
Overview The M66013FP is a semiconductor IC that is capable of performing serial-parallel conversion of data. This IC can set addresses. The microcomputer uses the four signal lines of EN, CLK, DI and DO to se.
* Is capable of providing high speed serial communication at 8 MHz.
* Provides two modes: echo back mode and normal mode.
* Is capable of reading serial input data in echo back mode. (However, 3 bits are available for the address.)
* Is capable of achieving communication protocol of current M66009FP.
Part NumberM66013FP Datasheet
Description8-BIT I/O EXPANDER
ManufacturerMitsubishi Electric
Overview The M66013FP is a semiconductor IC that is capable of performing serial-parallel conversion of data. This IC can set addresses. The microcomputer uses the four signal lines of EN, CLK, DI and DO to se.
* Is capable of providing high speed serial communication at 8 MHz.
* Provides two modes: echo back mode and normal mode. APPLICATIONS Inter board communication in VTR, AV and OA equipment, expansion of microcomputer I/O port, etc. BLOCK DIAGRAM ADDRESS SET INPUT A0 A1 5 6 A2 A3 7 8 MODE SET INP.

Price & Availability

Seller Inventory Price Breaks Buy
No distributor offers were returned for this part.