| Part Number | MAX810 |
|---|---|
| Manufacturer | onsemi |
| Overview |
Pin No.
Symbol
1
GND
2
RESET (MAX809)
2
RESET (MAX810)
3
VCC
Description Ground RESET output remains low while VCC is below the reset voltage threshold, and for a reset timeout period after.
* Precision VCC Monitor for 1.5 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V Supplies * Precision Monitoring Voltages from 1.2 V to 4.9 V Available in 100 mV Steps * Four Guaranteed Minimum Power *On Reset Pulse Width Available (1 ms, 20 ms, 100 ms, and 140 ms) * RESET Output Guaranteed to VCC = 1.0 V. * Low Su. |
MAX810 Datasheet
The MAX810 is a Very Low Supply Current 3-Pin Microprocessor Reset Monitors.
| Part Number | MAX810 |
|---|---|
| Description | 3-Pin Microprocessor Reset Circuits |
| Manufacturer | Maxim Integrated |
| Overview |
The MAX803/MAX809/MAX810 are microprocessor (μP) supervisory circuits used to monitor the power supplies in μP and digital systems. They provide excellent circuit reliability and low cost by eliminati.
* * Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages * * Fully Specified Over Temperature * * Available in Three Output Configurations * Open-Drain RESET Output (MAX803) * Push-Pull RESET Output (MAX809) * Push-Pull RESET Output (MAX810) * * 140ms (min) Power-On-Reset Pulse Width. |
| Part Number | MAX810 |
|---|---|
| Description | 3-pin microprocessor resets |
| Manufacturer | NXP Semiconductors |
| Overview |
The MAX809/MAX810 are single function microprocessor resets used to monitor supply voltages in microprocessor and other logic systems. They provide a reset signal to the microprocessor during power-up.
* Monitors 5.0 V, 3.3 V and 3 V supplies * 140 ms min. reset delay time: * Active-LOW RESET output (MAX809) * Active-HIGH RESET output (MAX810) * Power supply transient immunity * Guaranteed reset valid for 1.1 V * Available in small SOT23 and SC70 3-pin packages * No external components needed * . |