| Part Number | P4KE16A |
|---|---|
| Manufacturer | SOCAY |
| Overview | The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip jun. u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR le. |
P4KE16A Datasheet
The P4KE16A is a Axial Lead Transient Voltage Suppressors.
| Part Number | P4KE16A |
|---|---|
| Description | TRANSIENT VOLTAGE SUPPRESSOR |
| Manufacturer | EIC Semiconductor |
| Overview | P4KE SERIES VBR : 6.8 - 550 Volts PPK : 400 Watts TRANSIENT VOLTAGE SUPPRESSOR DO - 41 FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response. : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant. |
| Part Number | P4KE16A |
|---|---|
| Description | TVS Diode |
| Manufacturer | Littelfuse |
| Overview |
The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and induced lightning transients.
Features
• 400W peak pulse capability at 10/1000μs waveform, repe.
* 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% * Glass passivated chip junction in DO-41 Package * Fast response time: typically less than 1.0ps from 0 Volts to VBR min * Excellent clamping capability * Typical failure mode is a short circuit * Whisker tes. |
| Part Number | P4KE16A |
|---|---|
| Description | 400W TRANSIENT VOLTAGE SUPPRESSOR |
| Manufacturer | Won-Top Electronics |
| Overview |
®
WON-TOP ELECTRONICS
Features
Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping .
* Glass Passivated Die Construction * 400W Peak Pulse Power Dissipation * 5.5V * 513V Standoff Voltage * Uni- and Bi-Directional Versions Available * Excellent Clamping Voltage * Typical Response Time < 1nS * Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data * Cas. |