P4SMA480CA Datasheet
P4SMA480CA Datasheet (SEMIWILL)
SEMIWILL
The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. FEATURES • For surface mounted appl.
* For surface mounted applications in order to optimize board space.
* Low profile package.
* Built-in strain relief.
* Glass passivated junction.
* Excellent clamping capability. SMA/DO-214AC
* Repetition Rate (duty cycle):0.01%.
* Fast response time: typically less than 1.0ps from 0 Volts to VBR f.
P4SMA480CA Datasheet (Taitron Components)
Taitron Components
400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA550CA 400W Surface Mount Transient Voltage Suppressor SMA Features z Breakdown voltage from 6.8 to 550 volts z Low inductance, excelle.
z Breakdown voltage from 6.8 to 550 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z For surface mounted applications to optimize board space z Typical IR less than 1µA above 12V z High tempera.
P4SMA480CA Datasheet (Galaxy Microelectronics)
Galaxy Microelectronics
Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10.
z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time：Typically less then 1.0ps from 0 volts to BV min. z Ty.
P4SMA480CA Datasheet (JGD)
JGD
Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Ty.
* For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic materia.