P6KE36A Datasheet
P6KE36A Datasheet (HuaXingAn Electronics)
HuaXingAn Electronics
The P6KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • For surface mounted a.
* For surface mounted applications in order to optimize board space
* Reliable low cost construction utilizing molded plastic technique
* Plastic material has UL flammability classification 94V-O
* Typical IR less than 1uA above 12V
* Fast response time: typically less than 1.0ps from 0 Volts t.
P6KE36A Datasheet (Taiwan Semiconductor)
Taiwan Semiconductor
P6KE SERIES Taiwan Semiconductor CREAT BY ART 600W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 1000 μs w.
- Excellent clamping capability - Low dynamic impedance - 600W surge capability at 10 / 1000 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional - Typical IR less than 1μA above 10V - UL recognized file # E-326243 - Compliant .
P6KE36A Datasheet (Fairchild Semiconductor)
Fairchild Semiconductor
P6KE6V8(C)A - P6KE440(C)A — 600 W Transient Voltage Suppressors June 2013 P6KE6V8(C)A - P6KE440(C)A 600 W Transient Voltage Suppressors Features • Glass-Passivated Junction • 600 W Peak Pulse Power.
* Glass-Passivated Junction
* 600 W Peak Pulse Power Capability at 1.0 ms
* Excellent Clamping Capability
* Low Incremental Surge Resistance
* Fast Response Time; Typically
< 1.0 ps from 0 V to BV for Uni-directional and 5.0 ns for Bi-directional
* Typical IR < 1.0 mA Above 10 V
Applications
* Devic.
P6KE36A Datasheet (Digitron Semiconductors)
Digitron Semiconductors
P6KE6.8-P6KE440A High-reliability discrete products and engineering services since 1977 600W TRANSIENT VOLTAGE SUPPRESSORS FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500.
* Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
* Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
* For Bidirectional construction, indicate a C or CA suffix after part number, i.e. P6KE6.8CA.
.