P6KE480CA Datasheet and Specifications PDF

The P6KE480CA is a 600W Transient Voltage Suppressors.

Datasheet4U Logo
Part NumberP6KE480CA Datasheet
ManufacturerHuaXingAn Electronics
Overview The P6KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • For surface mounted a.
* For surface mounted applications in order to optimize board space
* Reliable low cost construction utilizing molded plastic technique
* Plastic material has UL flammability classification 94V-O
* Typical IR less than 1uA above 12V
* Fast response time: typically less than 1.0ps from 0 Volts t.
Part NumberP6KE480CA Datasheet
DescriptionTVS Diodes
ManufacturerLittelfuse
Overview The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 600W peak pulse capabil.
* 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
* Glass passivated chip junction in DO-15 Package
* Fast response time: typically less than 1.0ps from 0 Volts to BV min
* Excellent clamping capability
* Typical failure mode is short from over-specified volta.
Part NumberP6KE480CA Datasheet
DescriptionTransient Voltage Suppressors Diodes
ManufacturerRuilon
Overview Transient Voltage Suppressors Diodes Axial Leaded - 600W > P6KE6.8~600CA Series The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by l.
* Halogen-free
* Rohs compliant
* Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT
* Glass passivated Chip junction in DO-15 package
* 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01%
* Fast response time:typically less than 1.0ps from 0 V.
Part NumberP6KE480CA Datasheet
DescriptionTransient Voltage Suppressors
ManufacturerBruckewell Technology
Overview P6KE6.8C-600CA VBR : 6.8 - 600 Volts PPK : 600 Watts Features • Glass passivated jungtion chip • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time.
* Glass passivated jungtion chip
* 600W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.)
* Typical IR less then 1μA above 10V
* RoHS compliant package Applications
* For Bi-directional use C or CA.