P6KE8.2A Datasheet

The P6KE8.2A is a TRANSZORB TVS.

Datasheet4U Logo
Part NumberP6KE8.2A
ManufacturerVishay
Overview P6KE6.8A thru P6KE540A Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors DO-15 (DO-204AC) PRIMARY CHARACTERISTICS VWM VBR unidirectional VBR bidirectional PPPM .
* Glass passivated chip junction
* Available in unidirectional and bidirectional
* 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
* Excellent clamping capability
* Very fast response time
* Low incremental surge resistance
* Solder dip 275 °C max. .
Part NumberP6KE8.2A
DescriptionTRANSIENT VOLTAGE SUPPRESSORS
ManufacturerUnisonic Technologies
Overview The UTC P6KE is Transient Voltage Suppressors. it uses UTC’s advanced technology to provide customers with low leakage current, ultra-low response time and perfect clamping capability, etc  FEATURES . * Low leakage current * Ultra-low response time * Perfect clamping capability DO-15
* ORDERING INFORMATION Ordering Number Lead Free Halogen Free P6KEXXXXXL-Z15-B P6KEXXXXXG-Z15-B Note: Pin Assignment: A: Anode K: Cathode P6KEXXXXXL-Z15-B (1)Packing Type (2)Package Type (3)Halogen Free (4).
Part NumberP6KE8.2A
DescriptionTVS Diodes
ManufacturerLittelfuse
Overview The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • 600W peak pulse capabil.
* 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
* Glass passivated chip junction in DO-15 Package
* Fast response time: typically less than 1.0ps from 0 Volts to BV min
* Excellent clamping capability
* Typical failure mode is short from over-specified volta.
Part NumberP6KE8.2A
Description600W TRANSIENT VOLTAGE SUPPRESSORS
ManufacturerDigitron Semiconductors
Overview P6KE6.8-P6KE440A High-reliability discrete products and engineering services since 1977 600W TRANSIENT VOLTAGE SUPPRESSORS FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500.
* Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
* Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
* For Bidirectional construction, indicate a C or CA suffix after part number, i.e. P6KE6.8CA. .