| Part Number | P6SMB110A Datasheet |
|---|---|
| Manufacturer | PanJit Semiconductor |
| Overview |
P6SMB SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 600Watts
BREAK DOWN VOLTAGE
6.8 to 400 Volt
FEATURES
• For surface mounted applications in order to optimize board space. • Glass pass.
* For surface mounted applications in order to optimize board space. * Glass passivated junction * Low inductance * Plastic package has Underwriters Laboratory Fammability Classification 94V-O * High temperature soldering : 260°C /10 seconds at terminals * Lead free in compliance with EU RoHS 2011/6. |
P6SMB110A Datasheet and Specifications PDF
The P6SMB110A is a SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR.
Key Specifications
| Mount Type | Surface Mount |
|---|---|
| Max Operating Temp | 150 °C |
| Min Operating Temp | -55 °C |
| Part Number | P6SMB110A Datasheet |
|---|---|
| Description | TRANSIENT VOLTAGE SUPPRESSORS |
| Manufacturer | Central Semiconductor |
| Overview | The CENTRAL SEMICONDUCTOR P6SMB6.8A Series types are Surface Mount Uni-Directional Glass Passivated Junction Transient Voltage Suppressors designed to protect voltage sensitive components from high v. . |
| Part Number | P6SMB110A Datasheet |
|---|---|
| Description | TVS Diodes |
| Manufacturer | Littelfuse |
| Overview |
The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Agency Approvals
AGENCY
AGENCY FI.
* Excellent clamping capability * Low incremental surge resistance * aTybpoivceal1I2RVless than 1µA * For surface mounted applications to optimize board space * Low profile package * T ypical failure mode is short from over-specified voltage or current * W hisker test is conducted based on JED. |
| Part Number | P6SMB110A Datasheet |
|---|---|
| Description | 600W Surface Mount Transient Voltage Suppressor |
| Manufacturer | Taitron Components |
| Overview | Value PPPM IPPM Peak Pulse Power Dissipation on 10/1000μs Waveform Peak Pulse Current on 10/1000μs Waveform Minimum 600 See Table IFSM Peak Forward Surge Current TJ,TSTG Operating Junction and . SMB z Breakdown voltage from 6.8 to 250 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z For unidirectional types z Typical IR less than 1 µA above 10V z High temperature soldering guaranteed. |