| Part Number | SMBJ7.5 |
|---|---|
| Manufacturer | Taiwan Semiconductor |
| Overview |
SMBJ SERIES
Taiwan Semiconductor
600W, 5V - 170V Surface Mount Transient Voltage Suppressor
FEATURES
● Ideal for automated placement ● Glass passivated junction ● Excellent clamping capability ● Fas.
* Ideal for automated placement * Glass passivated junction * Excellent clamping capability * Fast response time: Typically less than 1.0ps * Typical IR less than 1μA above 10V * Meets ISO 7637-2 (Pulse 1/2a/2b/3a/3b) * Moisture sensitivity level: level 1, per J-STD-020 * RoHS Compliant * Halogen-fr. |
SMBJ7.5 Datasheet
The SMBJ7.5 is a Surface Mount Transient Voltage Suppressor.
| Part Number | SMBJ7.5 |
|---|---|
| Description | Transient Voltage Suppressor |
| Manufacturer | Microsemi |
| Overview |
This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available.
* * * * * * Economical surface mount design in both J-bend or Gull-wing terminations Available in both unidirectional and bidirectional construction (add C or CA suffix for bidirectional) Selections for 5.0 to 170 volts standoff voltages (VWM) Suppresses transients up to 600 watts @ 10/1000 µs (see . |
| Part Number | SMBJ7.5 |
|---|---|
| Description | Transient Voltage Suppressors |
| Manufacturer | Vishay |
| Overview |
SMBJ5.0 thru SMBJ188CA
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
DO-214AA (SMB J-Bend)
PRIMARY CHARACTERISTICS
VWM PPPM IFSM (uni-directional only) TJ max..
* Low profile package * Ideal for automated placement * Glass passivated chip junction * Available in uni-directional and bi-directional * 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % * Excellent clamping capability * Very fast response time * Lo. |
| Part Number | SMBJ7.5 |
|---|---|
| Description | TVS Diode |
| Manufacturer | Littelfuse |
| Overview |
The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Bi-directional
Agency Approvals
A.
* Excellent clamping capability * Low incremental surge resistance * Typical IR less than 1μA when VBR min>12V * For surface mounted applications to optimize board space * Low profile package * Typical failure mode is short from over-specified voltage or current * Whisker test is conducted based. |